BACKGROUND & DEVELOPMENT
In the summer of 2012, I developed the HTS circuit when I designed the GIGS BOSON and IRON FOREST pedals.I thought the HTS circuit may solve the problem with switching noise, and it worked well for the booster too.The switching noise level was reduced thanks to the HTS circuits and it preserves the sound quality whether the boost is turned on or off.
If there is sufficient headroom in the amp being used, the FINAL BOOSTER can be connected directly to the amplifier’s input and used for straight volume boost. If you’re using a tube amp it can be used for drive boost. The reason for the “FINAL BOOSTER” naming should now be clear… it will normally be the last pedal connected in an effect chain. Of course you could also connect it before an overdrive pedal in order to clip the overdrive input stage and create new distortion effects, for example.
A booster is essentially nothing more than a volume-increasing device, but in actual use it goes much deeper than that. Different sonic nuances can be achieved by connecting it in different ways. Using it in combination with overdrive or distortion pedals can produce some really interesting new effects. With a little ingenuity and trial-and-error testing it can be a source of unexpected new sounds.